دانلود رایگان مقاله استفاده موثر از دی اکسید کربن در فرایند گاز تا متانول مرکب از بهسازی مخلوط دی اکسید کربن / بخار و سنتز متانول

Two process models for a carbon-dioxide-utilized gas-to-methanol (GTM) process (CGTM) that primarily produces methanol were developed using the process simulation software Aspen Plus. Both models comprised a reforming unit, a methanol synthesis unit and a recycling unit, with the feeding point of the fresh feed CO2 as the principal configurational difference. In the reforming unit, CO2/Steam–mixed reforming was performed to generate the targeted syngas in flexible compositions. Meanwhile, CO2 hydrogenation was conducted over a Cu-based catalysts in the methanol synthesis unit to directly produce the targeted product, methanol. After methanol synthesis, the unreacted syngas was recycled to the methanol synthesis and reforming units to enhance energy efficiency. The simulation results revealed that both CGTM options can favorably improve the energy efficiency and significantly reduce the total CO2 emissions, compared to a conventional GTM process. The energy efficiency was shown to be highly affected by the recycle ratio and a higher recycle ratio seemed to favorably improve CO2 conversion, enhance energy efficiency, and reduce CO2 emissions. However, the split ratio (recycle-to-reforming unit/total recycle) seems to have little effect on the energy efficiency, and the optimum recycle to the reforming unit was determined to be none.