شنبه 15 اردیبهشت 1403
| عنوان مقاله | |
| عنوان مقاله |
Selective Wavelength Plasmonic Flash Light Welding of Silver Nanowires for Transparent Electrodes with High Conductivity |
| عنوان فارسی مقاله | جوش نور فلورسنت پلاسماس انتخابی Nanowires نقره ای برای الکترودهای شفاف با ولتاژ بالا |
| مشخصات مقاله انگلیسی | |
| نشریه: ACS Publications |
|
| سال انتشار |
2018 |
| عنوان مجله |
American Chemical Society |
| تعداد صفحات مقاله انگلیسی | 24 |
| رفرنس | دارد |
| تعداد رفرنس | 42 |
| چکیده مقاله | |
| چکیده |
In this work, silver nanowires (AgNWs) printed on a polyethylene terephthalate (PET) substrate using a bar coater were welded via selective wavelength plasmonic flash light irradiation. To achieve high electrical conductivity and transparent characteristics, the wavelength of the flash white light was selectively chosen and irradiated by using high-pass filters, low-pass filters, and band-pass filters. The flash white light irradiation conditions such as on-time, off-time, and number of pulses were also optimized. The wavelength range (400~500 nm) corresponding to the plasmonic wavelength of the AgNW could efficiently weld the AgNW films and enhance its conductivity. To carry out in-depth study of the welding phenomena with respect to wavelength, a multi-physics COMSOL simulation was conducted. The welded AgNW films under selective plasmonic flash light welding conditions showed the lowest sheet resistance (51.275 Ω/sq), and noteworthy transmittance (95.3 %). Finally, the AgNW film, which was welded by selective wavelength plasmonic flash light with optical filters, was successfully used to make a large area transparent heat film and dye-sensitized solar cells (DSSCs) showing superior performances. |
| کلمات کلیدی |
|
| دانلود | |
